192 168 0 1 Ip Address How To Access Router Login

192 168 0 1 Ip Address How To Access Router Login
  • Jan 11th, 2024
  • Ranjeet Singh
  • How To
    • Share :

Do you know what an IP Address is? Well, it addresses the network hardware that will help you connect your PC to other devices on your network and the rest of the world. The IP address will look like these digits: 506.457.12.512. Every device connected to the internet will have a unique IP address; hence, several IP addresses are available worldwide. This will be fulfilled by the new IP version called IPv6. Now, there are two types of IP versions: IPv4 and IPv6. Regarding the IPv4, the older version has a space of 4 billion IP addresses. On the other hand, the new IPv6 version can provide trillions of IP addresses to all internet users.

Difference between Public IP and Private IP

A private IP address is your device's address connected to your home or office. Suppose you have four devices to be connected to one internet service provider. All these devices will have a unique private IP address, and these IP addresses can never be accessed from devices outside your home or the area. Example-,,192.168. 0.1 Private IP addresses are not unique due to your network's limited number of devices. You can find the personal IP address of your device anytime. A public IP address is an IP address to which your business network or home is connected. And this IP address will connect you to the world, making it unique for all users.

Read Also: How To Troubleshoot a Dead Laptop?

What is What is or 192.168 0.1 1? How do I access my 192.168 0.1 router?

ip. is a private IP address (http;// used mainly by D-link routers and Net gear. And if you don't know, these are the brands of internet routers worldwide. Since this address is granted to these companies, any major router manufacturer can easily choose the same default address if they wish to.   

Read Also: Laptop Screen Repair Cost in India

How to access the router login to home?

Okay, so if your internet router's default IP address is admin, 192.168 0.1 11, with the correct username and password, then by following the steps given here and log into the configuration panel, you will be able to access the router login (192.168 0.1 login) with enter router Ip address, check if can't router access 192.168 Ip works. Let us understand "How do I log into my 192.168 0.1 router IP?" with the following steps- 

 1. First, you must be sure if the device is connected to the network wirelessly or through an Ethernet cable.

2. Then, open the web browser to use and access the internet.

3. Now, in the address bar, type this-,  or, HTTP//, IP address: or "".

NOTE: apart from this, you can alternatively use www. aka, http// – – htpp:// 

4. enter the default username and password (192.168.01/login) for the router's configuration page.

 5. After you enter the login details with admin login ( admin), you will be logged into the configuration page, and then you can make the changes accordingly. Following the guide above, you can easily access the router login to www 192.168 0.1 or https//: without hassle. If you are experiencing any difficulty, please contact us by clicking here: NSS laptop service center. Also, for more such blogs and guides, click here. To log in to your router, you must know its IP address (admin / You can find that using the ipconfig tool in Windows, which we'll explain below. You can also find the address on your phone by looking at the WIFI details, which, again, we'll show you how to do below.

  • After discovering this information, you will almost certainly need the router's admin password, which should be printed on a label on the router itself.

  • If someone has changed the default password, you must ask them for it or reset the router to factory settings.

  • If you can't access your router via WIFI, connect an Ethernet cable between your router and your PC or laptop. 

Find the gateway address in Windows.

First, bring up a command prompt by typing 'command' in the Start menu search box and choosing Command Prompt. Or press the Windows key and 'R' together and type 'CMD,' then press Enter. 

At the prompt, type 'ipconfig' and press Enter. You will see a list of the Network Adapters on your PC. Look through the information to find the number next to a Default gateway, 192.168 0.1. (192.168 0.1 admin login). This is the IP address (192.168. 0.1) of your router.

Read Also: Laptop Repair Cost in India

Find the gateway address in Android or iOS.

In iOS, open the Settings app and then: 

  • Tap on WIFI

  • Make sure your phone is connected to your router's WIFI network.

  • Tap the 'I' to the right of the network name.

  • Your router's IP addresses ( and 192.168 IP addresses follow to the 'Router.' Figure ""

  • In Android, settings menus vary from phone to phone, but once you find the WIFI settings:

  • Make sure your phone is connected to your router's WIFI network.

  • Tap on the network name.

  • Look for a 'gateway,' 'router,' or other entry in the list.

  • Unfortunately, some phones do not list the router's IP address 192.168 01 and IP address http //, so you must use another device to find it. Again, you can try looking at stickers on the router itself or in its manual for the default address or 192.168 01 login.

Log in to the router. With router login or #www. default password 

Armed with the router's IP address, open a web browser and type the default gateway number – in our case, - into the address bar, then press Enter. Don't add https:// before the IP address Ip 192.168 0.1.

Standard router IP addresses are:


  • (BT Home Hubs)


  • 192.168. 0.1

  • 192.168 0 1

  • (#www. #http 192.168 0.1, https // sites) and type

  • In rare cases, you might need to add a colon and a port number at the end (such as, but most home routers won't need this.

You should now see your router's login (login 192.168 0.1) screen. You will probably be asked to enter an admin password ( admin login) to make any changes to the router's settings. This should be printed on the router, but if you changed it, enter that password instead. If you don't have the password, you must factory reset the router by following the manufacturer's instructions. (We provide generic instructions below.)  Are you having problems accessing the login screen? Keep reading.

 Troubleshooting tips

  1. If you don't see the login screen, it could be because the gateway IP address has been manually entered under your network adapter settings.

  2. To check, open Windows' Control Panel and search for 'network.' Click (www 192.168 01) on View Network Connections under Network and Sharing Center.

  3. Right-click on the adapter you use to connect to the internet (typically the wireless one or Ethernet for a PC) and choose Properties.

  4. Then, scroll down the list to find Internet Protocol Version 4. Click on it and then click the Properties button.

  5. Repeat the previous steps to see if this has fixed the problem.

  • Ensure that an IP address (192.168. 0.1) is selected automatically and that the DNS server address is obtained.

Reset your router username and password.

If you've forgotten your router's username and password (192.168. 0.1), reset it to factory settings. This is usually achieved by pressing a button or inserting a paper clip or pin into a reset hole. Note: Before you do this, remember that you will lose any settings you've made and may have to re-enter your broadband username and details if you don't have a backup. However, having those details on hand is not a significant issue.

Check your manual to find out how long it takes to hold the button to reset it. The router must be connected to the mains and turned on for this to work and for the #192.168.l.0.1 login.

  • After resetting your router, you can follow the earlier steps to connect to the router's management interface.

  • You could now do so if you accessed your router's settings to configure a WIFI network. Changing the WIFI network name to something memorable is worth it, but setting a password is most important.

  • If possible, choose WPA2 or WPA3 security rather than WEP.

  • While you're at it, change the password for the router's interface to prevent anyone from accessing your router's settings.

Stick a label on the router to forget the IP address, WIFI password, router username login 192.168 0.1), and password.

Extra checks

If you still can't connect to your router 192.168 l 0.1.1, ensure any software firewalls are disabled. These might be part of your antivirus, internet security software, or a standalone application like Zone Alarm.

  • Temporarily turn these off to see if they are causing the problem. Windows' built-in firewall shouldn't cause a problem, and those can't access 192.168..0.1.

  • Check also for other software, such as parental control applications, which may prevent you from accessing certain websites – a router's settings interface is just a website.

  • There could also be settings within your web browser that are causing a problem, so try a different browser to eliminate this as an

  • To access a router as an administrator, you must know the router's IP address and the administrative user's password and username.

 How do you access a router as an administrator? How do you access the router with an IP address?

Follow these steps to connect to your router as admin (192.168 0.1 admin / HTTP 192.168 o 0.1 admin). These steps work for nearly any router and modem and can be accomplished through any modern web browser on desktop and mobile devices.  

  • Verify that your computer is connected to the router using either an Ethernet cable or a wireless connection.

If you're trying to access a router outside your network, you must enable what's usually called Remote Administration. You'll also need to know the router's external IP to make this work so you can enter that address into the browser. However, this type of connection isn't guaranteed even if the remote admin (192.168 0.1 admin) or (HTTP//192.168.i.0.1 admin) setting is on since the IP address can easily change (if it's a dynamic http// IP and htpp://, which most home networks are).

  • Identify the IP address of the router. Most routers are manufactured to use a default address such as,,, 192.168. 0.1., 192.168. o.1 192.168.01. (192.168.01 login) or

If those don't work and you don't know the router's default IP address (#192.168 0.1 1 / htt:// is, or if it was changed, see us How to Find Your Default Gateway IP Address (#192.168 0.1 1) guide.

  • Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox and request a connection to the router using its IP address. For example, type and in the address bar to connect to a router with as its IP address.

  • Enter the administrative login information to authenticate and access the admin settings or IP address to access the router.

  • Routers are shipped with default usernames and passwords ( password). Usually, the word admin might differ for your router login IP address with 192.168 0.1 1 login (some might not even have a password or use a username).

  • Some routers are not accessed in the way described above. Most are, but a few, like Google WIFI, require different (usually more manageable) steps, such as using a mobile app.

If you want to know about "you need to update your router settings, so you log into the administration panel, whose internet protocol (IP) address is Which IP version is this?" or What is and, If I Can't Access My Router? If the browser returns an error message after trying the username and password on the 192.168 0.1 router, your computer might not be connected to the correct router. Or, the username and password combination might not have been right. If you're sure that you're using a valid IP address to access the router, try the following procedures:

  • Reboot the router. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox, and request a connection to the router using its IP address (#

  • Temporarily turn off the firewall if you can't connect to 192.168 0.1. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox, and request a connection to the router using its IP address (#

  • Reset your router to factory defaults.

  • This restores the router to its default condition with the IP address, username, and password that it was shipped with. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox, and request a connection to the router using its IP address (#192.168 0.1 1) or ("")

Bottom line 1,192.168.0. What is a router at or 192.168.0? You can access the router login page by entering the router's IP address and password. Following the instructions above and logging into the configuration panel, you can verify if you can access the router. You must know your router's IP address to log in (admin 192.168.0. 168 0.1.. 1 router login, or htpp:/192.168.0. 1 in the address bar to connect to a router with 192.168.1. 1 and 192.168.0. 168 0.1.


Frequently Asked Questions

Laptop Repair | Computer Repair | Printer Repair

TP-Link: 1. Login to Router admin panel using its default IP Address – / 2. Enter the default username and password (admin/admin in most cases). 3. Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password . 4. Enter your preferred password and Save the change.

The default IP address is 192.168. 0.1. At the login, enter the username (admin) and your password (default password is nothing). Note: If you have forgotten this password, you will have no choice but to reset the router to factory defaults

Check your router's default password, usually printed on a sticker on the router. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties Security to see your Network Security Key.

The IP Address 192.168. 0.1 is a common Internet Protocol (IP) address for many wireless home routers, used to access administrative functions. The IP address is the most common address to access and configure wireless routers from a web browser. It’s a default address because specific IP address ranges are reserved for different types of networks, and is reserved for networks such as your home LAN. The story of this IP address is deeper than you might think, b before we get into that we’ll cover the bare basics of what an IP address is.

The router's default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly. NOTE: The location of the Reset button may vary for every model.

These passwords are sometimes printed on a sticker on the router itself. Try a common username and password combination: By default, many routers use a blank username and the password “admin” (don't type the quotes), the username “admin” and a blank password, or “admin” as both the username and password.

The default IP address is 192.168. 1.1, and the default login username and password both are admin (all lower case).
+91-97171 50098