The decision to format a laptop that was running Windows 7 was not an easy one to make because it is not possible to save user data and you will need to reinstall or restart the operating system and apps, neither of which is user-friendly for novices. However, if you use Windows 10, you may format a laptop in the same way that you would normally format a mobile device. That is to say, you will be able to eliminate the system problems while maintaining the integrity of the critical user data. Before you back up the contents on your Windows computer to an external hard drive, you should consider creating a bootable USB stick so that you may reinstall the operating system if you really need to format your Windows 10/8/7 laptop. It is relatively simple and inexpensive to do so nowadays.
Tips: If you can't access a hard drive or lose important files because you formatted or deleted them, don't be afraid to use RePicvid Data Recovery Software. It will help you get back deleted photos from your computer and other storage devices for free.
There are different ways to format a Windows computer, but the way to do it with Windows 10 is pretty good. Formatting Windows 10 is done with an easy-to-use interface and step-by-step instructions.
Step 1: Click the Start menu in the bottom left corner, then click the gear icon to open Settings.
Step 2: On the home page of Settings, click Update & Security, then click the Recovery tab on the left side of the page.
Step 3: Look at your options:
● This computer: This is the exact option we need, but you should also look at some others that might be able to fix some Windows 10 problems.
● There will be a lot of options under "Advanced startup," like "start-up from a bootable USB drive," "change Windows startup settings," and "restore from a system image."
● More ways to fix things: Install Windows from scratch to start over.
● Get a copy of your files: Put a copy of your files on a different drive.
Step 4: Click the "Get started" button under "Reset this PC." Then you'll see two options:
Keep my files: Uninstall apps and change settings, but keep your own files.
Get rid of everything: your personal files, apps, and settings.
Step 5: Erase all of the data.
When you click "Remove everything" to start the process of formatting your computer, you will be given two options: "Just delete my files" or "Delete my files and clean my drive."
Just removing my files lets the user get their files and media back from the computer's hard drive. If the user sells his computer or gives it to someone else to use, the data is in danger because the third person can easily get all the files and data from the drive. This makes this choice less safe and more dangerous.
Getting rid of files and cleaning up My drive takes time but is totally safe. It gets rid of all the information from the system, including the drive. However, it takes a while for the system to erase all the data from the drive.
Step 6: When the operating system asks if you're sure, click Next and then click the Reset button.
The Windows 10 computer will automatically restart itself to start the process of resetting. You have to wait until the reset process is done, which could take anywhere from a few minutes to a few hours. After that, your computer will start up with a brand-new copy of Windows 10.
Also Read: Graphics Card for Laptops: 5 Best Cards in India 2020
Also Read: Wifi Not Working on Dell Laptop? Resolve this in 5 Easy Steps.
Step 1: Turn on your laptop and go to Control Panel > Backup and Restore > Create a system repair disc.
Step 2: Put a CD on your laptop and click "Create disc." Then click "OK" and "Close."
Step 3: Press F10 or F12 to get into the boot menu, then choose the CD as the boot device. Click "Enter" and "Next." Then, under "Use recovery tools that can help fix problems starting Windows," choose your Windows system.
Step 4: Click "Next" and then "Command Prompt." Type "Format c:/fs: NTFS" and your system disk will start to be formatted.
Also Read: How to Fix Overheating Laptop: Reasons and Solutions
Also Read: How to Restore a Dead or Dying Laptop Battery
Step 1: When you turn on your laptop, press "Delete" to get into the BIOS. Choose "Advanced BIOS Features" and change the First Boot Device to CDROM. Click Y to save and quit setup.
Step 2: Put the Windows installation USB or CD into your laptop, then type "DOS."
Step 3: Type "format C:/" and "Y" at the DOS prompt to finish formatting.
Step 4: After formatting, put in your own Windows 7/8/10 system disk (CD boot) and follow the on-screen instructions to install.
Also Read: How to Uninstall Avast Antivirus in Windows 10: Step-by-step Description
Also Read: How to Reset Windows 10 With These 2 Easy Steps.
Step 1: Turn on your computer, and before Windows loads, press F8 or F11.
Step 2: To get to System Recovery, click "Next." There are two things to pick from. If you have already backed up your data, you can use Destructive Recovery to get a brand-new laptop.
Step 3: The utility will finish formatting your laptop and then restart it. Just be calm and wait until the end.
In this lesson, we came to the conclusion that there are four different ways to format a Windows 10/8/7 desktop or laptop computer in order to resolve faults, corruption, or crashes in the operating system without losing any vital data. The first approach is directly supplied in Windows 10 OS with an instruction that can be followed step by step; all you need to do is read the on-screen instructions carefully. People in a wide variety of circumstances can benefit from the application of other strategies as well. Do not be hesitant to share your experience with us in the comment section, regardless of whether or not you found that they were helpful.
Also Read: Google Chrome Not Connecting To Internet/Wifi? 5 Simple Fixes.
Also Read: Best SSD for Laptop? Learn The 7 Best Ways to Choose It.