You recently purchased a laptop and want to install Windows 10 on it, but you are unsure of how to boot your Lenovo Ideapad 320 from a bootable USB or you are unable to access the bios setup or boot menu. We have a solution to all of your difficulties, so don't worry. Simply reading this post will soon fix all of your problems.

In this blog post, I'll go over how to use Linux and Windows to boot the Lenovo Ideapad 320 from a USB drive. Not much of your time would be spent on me. Let's start now!

What exactly is a USB boot?

It is a technique for using a USB drive to install an operating system on a laptop or computer.

USB-based booting enables forced booting.

Instead of using a disc or a drive, booting from a USB enables urging booting information in a tiny USB.

Lenovo Ideapad 320 offers USB support for all current operating systems.

to start the Lenovo Ideapad and install Windows 10

In order to install Windows 10 or Linux, you must first turn your USB drive into a bootable USB drive. The Lenovo Ideapad 320's bios setup requires you to change a few settings right now. The bios key is F2, and the boot menu key is F12. Try tapping the Fn key together with these buttons if they aren't responding (Fn + F2,

(for example).

Step 1: Connect the laptop to the bootable Pendrive for Windows 10.

Step 2: After turning on the computer, swiftly click the F2 key to access the laptop's BIOS setting.

Step 3: Select the Boot Tab in the Bios Menu and set the boot mode to Legacy Support.

Using the arrow keys, navigate to the USB HDD option in step 4.

Step 6: Press Enter after selecting "Exit Saving Changes."

Step 7: After the laptop restarts, you will see this page; select "Press any key to boot from USB" by selecting it.

Step 8: Alternatively, you can access the Boot Menu by holding down the Fn key and the F12 key while the laptop is still on, and then choose your bootable USB drive from there.

Congratulations! Your personal Lenovo Ideapad 320 has now successfully been booted. The installation of Windows 10 can now go forward. One more thing about this laptop: on the left side, there is a concealed NOVO button that, when pressed, also activates the BIOS setup and the Boot menu.

Another approach

The boot from USB option must first be enabled.

Microsoft mandates hardware security measures from computer makers to stop USB booting. This is for a variety of reasons, some of which are sound.

In order to boot legacy devices:

  • To enter Setup, restart the computer and press F1.

  • Navigate to the RESTART menu on a ThinkPad.

  • Go to the EXIT menu for ThinkCentre and ThinkStation.

  • Disabled is the new value for OS Optimized Defaults.

  • To keep turning off the OS Optimized Defaults, click Yes.

  • To load the setup defaults, press F9.

  • To accept the loading default settings, select Yes.

  • To save and leave Setup, press F10.

  • To reach the boot menu and choose your boot device, press F12 if necessary.

Also Read: How to Check Max Ram Supported for Laptop

Also Read: How To Boot Mac Laptop From USB 2022?

Conclusion

I won't say much as the blog has informed you all about how to boot a hp laptop using a pen drive.

It is an easy process and you can use it for various purposes.